Update wiki submodule with desiccant link

.github/copilot-instructions.md

@@ -0,0 +1,71 @@
+````instructions
+# GitHub Copilot Instructions
+
+**Never use the unicode multiplication symbol (×, U+00D7) in any documentation, code, or markdown.**
+
+Always use a plain lowercase 'x' for dimensions and multiplication.
+
+- WRONG: `25mm × 25mm × 25mm`
+- CORRECT: `25mm x 25mm x 25mm`
+
+# Git Instructions
+
+- If a git command fails due to authentication reasons, retry the command exactly once.
+
+# Wiki Tagging Standards
+
+All wiki pages should use YAML frontmatter for tagging.
+
+## Challenge Tags
+All challenge pages must include the following tags:
+- `challenge`: Identifies the page as a challenge.
+- `challenge-NNN`: A unique sequential identifier.
+   - `challenge-001`: October 2025
+   - `challenge-002`: November 2025
+   - `challenge-003`: December 2025
+   - Increment for subsequent months.
+- `archive`: (Optional) Use this tag when the challenge is no longer active.
+
+## Visibility Tags
+- `hidden`: Use this tag to prevent the page from being published to the fargo3d.com website.
+
+# Challenge Lifecycle
+
+Challenges follow a specific monthly cycle:
+1. **Announcement**: A challenge is announced at the meetup in Month X.
+2. **Execution**: Participants work on the challenge between Month X and Month X+1.
+3. **Judging**: Results are brought to and judged at the meetup in Month X+1.
+
+**Example:**
+- **November Challenge**: Announced in November, Judged in December.
+- **December Challenge**: Announced in December, Judged in January.
+
+**Wiki Page Roles:**
+- **Current-Challenge.md**: Displays the challenge currently in the "Execution" phase (announced last month, to be judged at the upcoming meetup).
+- **Upcoming-Challenge.md**: Displays the challenge to be announced at the upcoming meetup.
+
+# Content Synchronization
+
+The `wiki-fargo3d` submodule contains the official documentation. Some content is mirrored in the main repository root.
+
+- **Readme.md vs wiki-fargo3d/Home.md**: Keep announcements and general descriptions in sync.
+- **challenges.md vs wiki-fargo3d/Current-Challenge.md**: `challenges.md` should reflect the active challenge found in the wiki.
+- **itinerary.md vs wiki-fargo3d/Itinerary.md**: Keep meeting schedules in sync.
+
+## Git Workflow for Wiki Updates
+1. Make changes in `wiki-fargo3d/`.
+2. Commit and push changes in `wiki-fargo3d`.
+3. Go to root `P:\3dPrintMeetup`.
+4. Commit the submodule update.
+5. Push root changes.
+
+## Example Front Matter
+
+```yaml
+---
+tags:
+ - challenge
+ - challenge-002
+---
+```
+````

Readme.md

@@ -3,32 +3,23 @@ gitea: none
 include_toc: true
 ---
 
-# **⚠️ IMPORTANT: MEETUP DATE CHANGES**
-
-## **Next Two Meetups Will NOT be on the 3rd Wednesday**
-
-- **November Meetup: November 12th, 2025**
-- **December Meetup: December 10th, 2025**
-
-**We will resume normal 3rd Wednesday schedule after the New Year.**
-
----
-
 # 3D Fuel 3D Printing Monthly Meetup
 
 Welcome to the official repository for our monthly 3D printing meetup! This community-driven event brings together 3D printing enthusiasts, makers, and innovators to share knowledge, showcase projects, and explore the latest in additive manufacturing technology.
 
-## 📋 Table of Contents
+## Table of Contents
 
-- [📋 Itinerary](#-itinerary)
-- [🏆 Monthly Challenges](#-monthly-challenges)
-- [🎨 HueForge Integration](#-hueforge-integration)
-- [💡 Community Planning](#-community-planning)
-- [🎯 About Our Meetup](#-about-our-meetup)
-- [🤝 Community Engagement](#-community-engagement)
-- [📞 Getting Involved](#-getting-involved)
+- [Itinerary](#itinerary)
+- [Monthly Challenges](#monthly-challenges)
+- [HueForge Integration](#hueforge-integration)
+- [Community Planning](#community-planning)
+- [About Our Meetup](#about-our-meetup)
+- [Community Engagement](#community-engagement)
+- [Getting Involved](#getting-involved)
+- [Join the Discord](https://discord.gg/BSJbsj6m)
+- [Feedback](mailto:feedback@fargo3d.com)
 
-### [<EFBFBD> Itinerary](./itinerary.md)
+### [Itinerary](./itinerary.md)
 
 Complete meeting format and timeline for our monthly gatherings. Includes:
 
@@ -38,18 +29,19 @@ Complete meeting format and timeline for our monthly gatherings. Includes:
 - Featured presentations and workshops
 - Meeting guidelines and etiquette
 
-## 🏆 Monthly Challenges
+## Monthly Challenges
 
 ### [Current Challenges](./challenges.md)
 
 Monthly design challenges and competitions. Currently featuring:
 
-- **October 2025**: "Is it Glass or Clearly Natural?" transparency challenge
+- **Active (Dec)**: "Bring Your Test Models" - Calibration print showcase (Judging Jan 2026)
+- **Upcoming (Jan)**: [TBD]
 - Challenge rules, judging criteria, and submission guidelines
 - Prize structures and recognition programs
 - Tips for achieving the best results
 
-## 🎨 HueForge Integration
+## HueForge Integration
 
 ### [3D Fuel Filament Library](./HueForge/)
 
@@ -63,7 +55,7 @@ Enhance your HueForge projects with our comprehensive 3D Fuel filament library!
 
 Download the library and follow the installation guide to add professional-grade 3D Fuel filament data to your HueForge workflow.
 
-## 💡 Community Planning
+## Community Planning
 
 ### [Ideas & Planning](./ideas.md)
 
@@ -74,7 +66,7 @@ Creative concepts and future planning for meetup activities:
 - Event structure improvements
 - Monthly challenge selection processes
 
-## 🎯 About Our Meetup
+## About Our Meetup
 
 ### What We Do
 
@@ -103,7 +95,7 @@ We host themed design challenges that encourage creativity and skill development
 - **Community Judging**: Group evaluation during show & tell sessions
 - **Recognition**: Prizes and social media features for winners
 
-## 🤝 Community Engagement
+## Community Engagement
 
 ### Participation
 
@@ -118,7 +110,7 @@ We host themed design challenges that encourage creativity and skill development
 - **Discord Integration**: Online community voting and discussions
 - **Social Media**: Documentation and sharing of member achievements
 
-## 📞 Getting Involved
+## Getting Involved
 
 ### How to Participate
 

announcements/December2025.md

@@ -0,0 +1,39 @@
+# 3D Fuel December Meetup - Meeting Announcement
+
+## Email Subject Line
+
+Join Us December 10th: 3D Printing Meetup + SVG Lettering + FormNext Recap + Challenge Winners
+
+---
+
+## Email Body / Reddit Post
+
+Hey everyone!
+
+Join us for the **December 3D Printing Meetup**.
+
+For more information about the meetup and community events, visit [www.fargo3d.com](https://www.fargo3d.com)
+
+### Meeting Agenda
+
+**Time: 6:00 - 8:00 PM**
+
+1. **Social Time & Networking** - Welcome and catching up
+2. **Industry News Update** - **Formnext Coverage** with John - A look at the latest tech from the world's largest additive manufacturing expo.
+3. **Show & Tell & Challenge Judging** - **November Challenge Judging**: "Wait, This Was Printed?" (Smooth Cube Challenge). Bring your cubes!
+4. **New December Challenge Announcement** - "Bring Your Test Models" - Share your favorite calibration and testing prints.
+5. **Featured Presentation: SVGs and Lettering on Prints** - Presented by **Eric Spooner**
+6. **Closing Discussion** - Wrap-up and informal conversation
+
+### Special Presentation: SVGs and Lettering on Prints
+
+Join us for a deep dive into adding custom graphics and text to your 3D prints! This presentation will cover:
+
+- **Working with SVGs**: How to prepare vector graphics for 3D printing.
+- **Lettering Techniques**: Best practices for embedding or embossing text onto your models.
+- **Workflow Tips**: From design software to slicer implementation.
+
+### Location & Details
+
+**When:** Wednesday, December 10th, 2025 | 6:00 - 8:00 PM  
+**Where:** 3D-Fuel 2222 7th Ave N Fargo, ND 58102

announcements/November2025.md

@@ -0,0 +1,76 @@
+# 3D Fuel November Meetup - Meeting Announcement
+
+## Email Subject Line
+
+Join Us November 12th: 3D Printing Meetup + HueForge Presentation + New Challenge
+
+---
+
+## Email Body / Reddit Post
+
+Hey everyone!
+
+Join us for the **November 3D Printing Meetup**. Please note: **This month's meeting is on Wednesday, November 12th at 6:00 PM** (not our usual 3rd Wednesday).
+
+**Also note:** December's meetup will be on **Wednesday, December 10th** (also adjusted for the holidays).
+
+### Meeting Agenda
+
+**Time: 6:00 - 8:00 PM**
+
+1. **Social Time & Networking** - Welcome and catching up
+2. **Industry News Update** - Latest 3D printing trends with John
+3. **Show & Tell & Challenge Judging** - October transparency challenge winners and community showcases
+4. **New November Challenge Announcement** - "Wait, This Was Printed? How Are There No Layer Lines?" - Can you achieve the smoothest surface finish possible?
+5. **Featured Presentation: Getting Started with HueForge** *(30 minutes)* - Presented by **Eric Spooner**
+6. **Closing Discussion** - Wrap-up and informal conversation
+
+### Special Presentation: Getting Started with HueForge
+
+Join us for a brief introduction to HueForge color mapping software! This presentation will cover:
+
+- **Installing the 3D Fuel Filament Library** - Add our complete 127+ filament database to HueForge
+- **Photo-to-Print Workflow** - Working with a simple Black and White photo
+- **Slicer Setup & Integration**:
+  - Configuring HueForge with **Bambu Studio** using modifiers vs Painting
+
+Perfect for anyone looking to take their color and multi-material printing to the next level!
+
+### What to Expect
+
+- Network with local 3D printing enthusiasts
+- Showcase your latest prints
+- Learn about our new November challenge: achieving the smoothest layer-line-free prints
+- Learn color mapping techniques with HueForge
+- Ask questions from experienced makers
+
+### Location & Details
+
+**When:** Wednesday, November 12th, 2025 | 6:00 - 8:00 PM  
+**Where:** 3D-Fuel 2222 7th Ave N Fargo, ND 58102
+
+### Don't Miss Out
+
+Whether you're a 3D printing beginner or experienced maker, we have something for everyone. Bring your questions, your latest prints, and your enthusiasm!
+
+**See you there!**
+
+---
+
+## Social Media Quick Version (Twitter/X)
+
+November meetup is THIS WEDNESDAY (Nov 12th) at 6 PM! New challenge: "Wait, This Was Printed? How Are There No Layer Lines?" Plus Eric Spooner presents HueForge basics - photo-to-print workflows, 3D Fuel filament library & slicer setup. Show & tell too! #3DPrinting #3DFuel
+
+---
+
+## Meeting Details Reference
+
+| Detail | Information |
+|--------|-------------|
+| **Date** | Wednesday, November 12th, 2025 |
+| **Time** | 6:00 - 8:00 PM |
+| **Presentation Topic** | Getting Started with HueForge |
+| **Presenter** | Eric Spooner |
+| **Duration** | 30 minutes |
+| **Key Topics** | 3D Fuel Library Installation, B&W Photo Mapping, Bambu Studio/Orca Slicer Setup |
+| **Note** | Special date - not 3rd Wednesday |

challenges.md

@@ -9,32 +9,31 @@ Welcome to our monthly 3D printing challenges! Each month features a unique them
 
 ## Active Challenge
 
-### October 2025: "Is it Glass or Clearly Natural?"
+### December 2025: "Bring Your Test Models"
 
-**Theme**: Transparency and clarity testing with 3D Fuel "Clearly Natural" filaments
+**Theme**: Sharing and comparing printer calibration and test models.
 
 **Key Details**:
 
-- **Model**: 25mm diameter x 50mm height cylinder in vase mode
-- **Materials**: 3D Fuel "Clearly Natural" PCTG or PLA
-- **Focus**: Maximum transparency and print quality
-- **Submission Deadline**: October 28, 2025
+- **Model**: Your favorite test/calibration print (Benchy, Cube, Torture Test, etc.)
+- **Goal**: Share why you use it and what it helps you tune
+- **Voting**: Group vote for "Best Test Model" (Usefulness, Uniqueness, Coolness)
 
-**[📋 View Full Challenge Details](./challenges/October-2025/readme.md)**
+**[View Full Challenge Details](https://meetup.fargo3d.com/Fargo3d/3DPrintMeetup/wiki/Current-Challenge)**
 
 ## Upcoming Challenge
 
-### November 2025: "[Challenge Name TBD]"
+### January 2026: "[Challenge Name TBD]"
 
 **Status**: Planning in progress
 
 **Expected Timeline**:
 
-- **Announcement**: November meeting (November 12th, 2025)
-- **Submission Period**: TBD
-- **Judging**: TBD
+- **Announcement**: January meeting (January 2026)
+- **Submission Period**: February 2026
+- **Judging**: February 2026
 
-**[📋 View Challenge Placeholder](./challenges/November-2025/readme.md)**
+**[View Challenge Placeholder](./challenges/November-2025/readme.md)**
 
 ## Challenge Archive
 

challenges/December-2025/readme.md

@@ -0,0 +1,33 @@
+---
+gitea: none
+include_toc: true
+---
+
+# December 2025 Challenge: "Bring Your Test Models"
+
+This month's challenge is all about the models we use to test, tune, and calibrate our printers. Everyone has a favorite "go-to" print—whether it's a Benchy, a calibration cube, a torture test, or something unique you've found.
+
+**Bring your favorite test models to the meetup!**
+
+## Challenge Details
+
+### The Goal
+Share what test models you use and why. Do you use them for:
+- Calibrating dimensional accuracy?
+- Testing overhangs and bridging?
+- Tuning retraction settings?
+- Checking first layer adhesion?
+- Just for fun?
+
+### Submission Requirements
+- **Physical Model**: Bring your printed test model(s) to the January meetup.
+- **Explanation**: Be prepared to share *why* this is your favorite test model and what it helps you achieve.
+
+### Voting & Awards
+- **Group Vote**: The group will vote on what they think is the **Best Test Model**.
+- **Criteria**: Usefulness, uniqueness, or just plain coolness!
+
+## Timeline
+- **Challenge Announcement**: December 10, 2025 (at December meetup)
+- **Show & Tell / Voting**: January 2026 (during January meetup)
+- **Winner Announcement**: January 2026 (end of January meetup)

challenges/January-2026/readme.md

@@ -0,0 +1,18 @@
+---
+gitea: none
+include_toc: true
+---
+
+# January 2026 Challenge: [Title TBD]
+
+**Status**: Planning in Progress
+
+## Challenge Overview
+
+Details for the January 2026 challenge will be announced at the January meetup.
+
+## Timeline
+
+- **Announcement**: January 2026
+- **Submission**: February 2026
+- **Judging**: February 2026

challenges/November-2025/readme.md

@@ -42,12 +42,14 @@ This challenge focuses on:
 1. **Layer Line Visibility** (100%): The appearance and visibility of layer lines - less visible is better
    - All cubes must meet basic challenge requirements (25mm cube dimensions, exactly 2 walls, no post-processing)
    - Winner is determined solely by smoothness of surface and minimal layer line appearance
+   - **Tiebreaker**: If two prints are too close to differentiate, the fastest print time wins
 
 ### Submission Requirements
 
 - **Physical Model**: Bring your printed 25mm cube to the December meetup for judging
-- **Dimension Verification**: Must be exactly 25mm × 25mm × 25mm
+- **Dimension Verification**: Must be exactly 25mm x 25mm x 25mm
 - **Wall Count Verification**: Must show exactly 2 walls when inspected
+- **Print Time**: Record and report your total print time (used as tiebreaker if needed)
 - **Documentation**: Include photos showing:
   - Close-up surface details
   - Overall cube appearance

challenges/readme.md

@@ -11,7 +11,6 @@
 #### Materials & Constraints
 
 - **Filament**: [Specify required filament type/brand]
-- **Maximum Filament Usage**: [Weight limit if applicable]
 - **Model Specification**: [Dimensions, complexity, or provided model details]
 - **Print Mode**: [Any specific printing requirements]
 
@@ -47,11 +46,7 @@
 
 #### Awards
 
-- **[Award 1]**: [Description]
-- **[Award 2]**: [Description]
-- **[Award 3]**: [Description]
-- **People's Choice Award**: Community favorite
-- **Innovation Award**: [Description]
+- Determined at each competition.
 
 #### Documentation
 
@@ -62,10 +57,9 @@
 ### Timeline
 
 - **Challenge Announcement**: [Date]
-- **[Key Milestone]**: [Date]
-- **Submission Deadline**: [Date]
-- **Judging Period**: [Date Range]
-- **Winner Announcement**: [Date]
+- **Submission Deadline**: [Date](Next Meetup)
+- **Judging Period**: During Next Meetup
+- **Winner Announcement**: At Following Meetup
 
 ### [Model Creation/Setup Instructions]
 

wiki-content-gitea/Ideas-and-Planning.md

@@ -1,3 +1,8 @@
+---
+gitea: none
+tags:
+ - hidden
+---
 # Ideas and Planning
 
 ## Future Event Concepts